Anu IntDec, Interior and Facade Contractors
+91 98960 63635Book a call

Our service

Vinyl and Wooden Flooring

Vinyl and wooden flooring supplied and laid for hospitals, schools, offices, showrooms and hotels.

Discuss this serviceWhatsApp us
  • Hospitals and clinics
  • Schools and training centres
  • Offices and showrooms
  • Hotels and banquet halls
Vinyl floor tiles in grey and beige blocks along a corridor

The right floor makes a space easier to clean, safer to walk on and better to look at. We supply and lay vinyl and wooden flooring and prepare the base so that it lasts.

The main options

Floor What it is Good for Points to consider
Vinyl sheet Continuous roll, seams can be welded Hospitals, clinics, labs, schools Needs a very smooth base; seams must be well done for hygiene
Vinyl tiles and planks Loose-lay or glued tiles and planks Offices, retail, corridors, classrooms Easy to replace individual pieces; edges must be tight
Laminate Printed fibreboard click-together planks Offices, showrooms, dry areas Not for wet areas; keep clear of standing water
Engineered wood Real wood surface on a stable core Offices, hotels, reception areas Needs acclimatisation and a flat, dry base
Solid wood Single-piece planks Premium interiors Sensitive to moisture and temperature; needs skilled fitting
Wood-finish skirting and trims Matching edges and transitions All wood-effect floors Plan details at doors and thresholds

Our guide to flooring for hospitals and clinics explains the hygiene points for healthcare buildings.

Preparing the base

Most flooring problems begin below the floor.

  • Flatness. Vinyl follows the surface under it, so bumps and dips show. We check with a straightedge and level low spots with a self-levelling compound.
  • Dryness. Moisture from the slab or from leaks damages adhesive and wood. We test the base and wait or treat it if it is damp.
  • Cleanliness. Dust, oil, paint and old adhesive must be removed so that adhesive can bond.
  • Soundness. Loose or cracked areas are repaired before the floor goes down.
  • Temperature and acclimatisation. Wood and laminate are kept in the room for the time the maker advises before fitting.

How the work runs

  1. Site visit. We check the floor area, levels, moisture, doors, thresholds and traffic.
  2. Selection. We help you choose the type, thickness, finish and colour, with samples.
  3. Programme. Flooring is scheduled after wet trades and painting where possible, with protection afterward.
  4. Base preparation. Repairs, levelling and priming.
  5. Laying. Setting out from the centre or the longest wall, adhesive or underlay as specified, seams and joints finished neatly, expansion gaps left where required.
  6. Finishing. Skirting, coving, trims and thresholds fitted, the floor cleaned and protected.
  7. Handover with care instructions and any maintenance products recommended.

Details that make a good floor

  • Coving and skirting. In hospitals and kitchens, the floor can be turned up the wall to form a sealed, easily cleaned corner.
  • Joints and seams. Sheet vinyl seams can be heat-welded for hygiene.
  • Thresholds. Where floors meet, a neat trim avoids trip hazards.
  • Slip resistance. Wet or high-traffic areas need a surface with suitable grip.
  • Expansion gaps. Wood and laminate move with humidity. Gaps at the edges are hidden under skirting.
  • Protection. After laying, floors are covered to prevent damage while other trades finish.

Common problems and how to avoid them

Problem Usual cause How we avoid it
Bubbles or lifting Damp base, poor adhesive coverage Moisture check, correct adhesive and rolling
Visible bumps Uneven base Levelling before laying
Gaps between planks Poor fitting or movement Correct acclimatisation and tight joints
Buckled boards No expansion gap, moisture Gaps left, moisture controlled
Seams opening Poor welding or adhesive Correct tools and technique, clean seams
Dull, scratched surface Wrong cleaning or no protection Care advice, protective pads under furniture

Care and maintenance

Sweep or vacuum frequently, because grit scratches. Damp-mop with a mild cleaner and wipe up spills at once. Do not soak wooden floors. Use felt pads under furniture and protect floors from heavy point loads. Re-seal joints and replace damaged pieces before problems spread. Our maintenance contracts include floor checks.

What affects cost and time

The type and thickness of the floor, the area, the condition of the base, the amount of preparation, the number of cuts and corners, the skirting and trims, and the working hours all affect cost. Base preparation is often a large share of the work and should be listed separately.

Planning a floor? Book a call about your space.

Guides

Read more about flooring

flooring · 5 min read

Flooring for Hospitals and Clinics: Choosing a Hygienic Floor

What makes a floor suitable for healthcare buildings: seamless sheet, coving, slip resistance, base preparation and cleaning, with a comparison of vinyl options.

Read the guide →

schools · 4 min read

Checklist for Renovating a School Before the New Session

A planning checklist and timeline for trustees and principals who need classrooms, ceilings, floors and facades ready on time, with the mistakes that cause most delays.

Read the guide →

quotations · 4 min read

How to Read a Fit-out Quotation

What to compare when two or three contractors send proposals for a fit-out, and the warning signs in a quotation that looks too good.

Read the guide →

Questions

Flooring: common questions

Which is better, vinyl or wooden flooring?
Vinyl is easy to clean, comfortable underfoot and suits hospitals, schools and busy commercial areas. Wooden and wood-finish flooring gives a warmer look for offices, showrooms and hotels. We advise after seeing the floor, the traffic and the cleaning routine.
Does the sub-floor need preparation?
Almost always. A flat, dry, clean, firm base is essential. We check levels and moisture, repair cracks, level low spots and prime where needed. Skipping this step is the most common reason for floors that fail.
Can vinyl be laid over old tiles?
Sometimes, if the existing surface is sound, flat and well bonded. Grout lines and uneven tiles can show through, so they usually need to be filled or levelled first. We check on site.
Is laminate the same as wood?
No. Laminate is a printed fibreboard surface with a protective layer. It looks like wood and is easy to lay, but it is not solid or engineered wood and it dislikes standing water. We explain the differences so that you can choose.
How long before the floor can be used?
It depends on the product and adhesive. Click-together floors can be used almost at once. Glued vinyl and levelling compounds need curing time. We state the waiting time in the programme.
How should I clean it?
Sweep or vacuum regularly and mop with a damp cloth and a mild cleaner. Avoid soaking, harsh solvents and abrasive pads. We give product-specific care advice at handover.

More services

Related work

Aluminium fabrication

Aluminium partitions, windows, doors and frames, cut and finished in our own workshop and installed on site.

ACP cladding

Aluminium composite panel cladding and facade work that gives industrial and commercial buildings a clean, durable exterior.

Glazing

Glass facades, glazed windows and doors in aluminium frames, supplied, fitted and sealed with care for safety and weatherproofing.

False ceilings

Gypsum board, POP and aluminium false ceilings for offices, hospitals, schools, showrooms and hotels.

Planning a project? Let us talk it through.

Tell us what you have in mind. We will call you, visit the site and put the scope, schedule and cost in writing.

Discuss your requirementWhatsApp us
CallWhatsAppBook a call